Carpentry wood screws TX wafer head with serration and type 17
67052
SUPER TMT TX RAN DR
certifications
| Diameters | Limits | B | d1 | P | TX |
|---|---|---|---|---|---|
| 6,0 | Min. | 13,50 | 4,80 | ~ 4,50 | |
| Max | 14,50 | 5,30 | |||
| 8,0 | Min. | 22,00 | 6,80 | ~ 5,50 | T40 |
| Max | 23,50 | 7,20 |
- Carbon steel: C10B21
- Case hardness: HV 420-500
- Core hardness: HV 300-390
- Threaded section: as per listing (Ex 6,0x200/70 = thread 70)
finishing
TG 41
ENDURO
1,000 HR SALT SPRAY TEST
- 10 µm thick fired ceramic coating
- High corrosion resistant chemical conversion film of an approximate thickness of 2 µm
- Metal zinc layer of a thickness ranging between 3 and 5 µm
- Steel substrate
The European Community Directive RoHS (Restriction of Hazardous Substances) which lays down rules on the restriction of use of hazardous substances in electrical and electronic equipment, in order to contribute to the protection of human and the environmental health.packaging
| Sizes | Pieces per Carton | Box |
|---|---|---|
| 6,0 x 80/50 | 2.400 (12) | 200 |
| 100/50 | 1.200 (12) | 100 |
| 120/50 | 1.200 (12) | 100 |
| 140/70 | 1.200 (12) | 100 |
| 160/70 | 600 (6) | 100 |
| 180/70 | 600 (6) | 100 |
| 200/70 | 600 (6) | 100 |
| 220/70 | 600 (6) | 100 |
| 240/70 | 600 (6) | 100 |
| 260/70 | 400 (4) | 100 |
| 280/70 | 400 (4) | 100 |
| 300/70 | 400 (4) | 100 |
| 8,0 x 80/50 | 700 (14) | 50 |
| 100/50 | 700 (14) | 50 |
| 120/50 | 600 (12) | 50 |
| 140/80 | 600 (12) | 50 |
| 160/80 | 600 (12) | 50 |
| 180/80 | 300 (6) | 50 |
| 200/80 | 300 (6) | 50 |
| 220/80 | 300 (6) | 50 |
| 240/80 | 300 (6) | 50 |
| 260/80 | 200 (4) | 50 |
| 280/80 | 200 (4) | 50 |
| 300/80 | 200 (4) | 50 |
| 320/80 | 200 (4) | 50 |
| 340/80 | 200 (4) | 50 |
| 360/80 | 200 (4) | 50 |
| 380/80 | 200 (4) | 50 |
| 400/80 | 200 (4) | 50 |