Chipboard screws TX flat head, ribs under head and drilling point
04052
TSP TX DR
certifications
| Diameters | Limits | A | D | E | P | TX |
|---|---|---|---|---|---|---|
| 4,0 | Min. | 7,40 | 3,70 | 2,75 | ~2,00 | T20 |
| Max | 7,70 | 4,10 | 2,85 | |||
| 5,0 | Min. | 9,20 | 4,70 | 3,15 | ~2,60 | T25 |
| Max | 9,50 | 5,10 | 3,25 |
- Carbon steel: C1022
- Case hardness: HV 560 min.
- Core hardness: HV 300-420
- Threaded section: as per listing (Ex 4,0x30/21 = thread 21)
finishing
TG 51
Blue Zinc
Cr3 3µm
TG 52
Yellow Zinc
Cr3 3µm
YELLOW ZINC (Cr VI) finishing available until end of stock
The European Community Directive RoHS (Restriction of Hazardous Substances) which lays down rules on the restriction of use of hazardous substances in electrical and electronic equipment, in order to contribute to the protection of human and the environmental health.packaging
| Sizes | Pieces per Carton | Minimum Consignment | Box | Bulk |
|---|---|---|---|---|
| 4,0 x 30/21 | 6.000 (12) | 2.000 (4) | 500 | 10.000 |
| 35/26 | 4.000 (8) | 2.000 (4) | 500 | 10.000 |
| 40/28 | 4.000 (8) | 2.000 (4) | 500 | 8.000 |
| 45/28 | 2.400 (12) | 800 (4) | 200 | 6.000 |
| 50/33 | 2.400 (12) | 800 (4) | 200 | 5.000 |
| 60/38 | 2.400 (12) | 800 (4) | 200 | 4.000 |
| 70/48 | 2.400 (12) | 800 (4) | 200 | 3.000 |
| 5,0 x 50/33 | 2.400 (12) | 800 (4) | 200 | 4.000 |
| 60/38 | 1.600 (8) | 800 (4) | 200 | 3.000 |
| 70/48 | 1.600 (8) | 800 (4) | 200 | 2.000 |
| 80/48 | 1.600 (8) | 800 (4) | 200 | 2.000 |
| 90/58 | 1.200 (12) | 400 (4) | 100 | 1.500 |
| 100/58 | 1.200 (12) | 400 (4) | 100 | 1.000 |