Self-drilling screws ph truss washer head
81380
TMT PH RAN
certifications
The recommended screwdriver speed R is purely indicative. The value proposed is based on tests carried out in our laboratories in conformity with regulatory norms. The use of different materials on site may therefore determine values other than those recommended. T value is the drilling capacity.
| Diameters | Limits | B | H+U | d | P | PH | R(g/min) | T |
|---|---|---|---|---|---|---|---|---|
| 4,2 | Min. | 10,80 | 1,90 | 4,09 | ~1,40 | 2 | 2.250 | 2,00 |
| Max | 11,20 | 2,50 | 4,22 | |||||
| 4,8 | Min. | 12,20 | 1,90 | 4,65 | ~1,60 | 2 | 2.250 | 4,00 |
| Max | 12,80 | 2,50 | 4,80 |
- Carbon steel: C1022
- Case hardness: HV 560 min.
- Core hardness: HV 330-420
- Threaded section: as per listing (Ex 4,8x70/60 = thread 60)
finishing
TG 51
Blue Zinc
Cr3 3µm
TG 57
Black Zinc
Cr3
The European Community Directive RoHS (Restriction of Hazardous Substances) which lays down rules on the restriction of use of hazardous substances in electrical and electronic equipment, in order to contribute to the protection of human and the environmental health.packaging
| Sizes | Pieces per Carton | Minimum Consignment | Box |
|---|---|---|---|
| 4,2 x 9,5 | 8.000 (8) | 4.000 (4) | 1.000 |
| 13 | 8.000 (8) | 4.000 (4) | 1.000 |
| 16 | 6.000 (6) | 2.000 (2) | 1.000 |
| 19 | 6.000 (6) | 2.000 (2) | 1.000 |
| 22 | 6.000 (6) | 2.000 (2) | 1.000 |
| 25 | 4.000 (4) | 2.000 (2) | 1.000 |
| 32 | 3.000 (6) | 1.000 (2) | 500 |
| 38 | 3.000 (6) | 1.000 (2) | 500 |
| 4,8 x 13 | 6.000 (6) | 2.000 (2) | 1.000 |
| 16 | 6.000 (6) | 2.000 (2) | 1.000 |
| 19 | 4.000 (8) | 2.000 (4) | 500 |
| 22 | 4.000 (8) | 2.000 (4) | 500 |
| 25 | 3.000 (6) | 1.000 (2) | 500 |
| 32 | 2.000 (4) | 1.000 (2) | 500 |
| 35 | 2.000 (4) | 1.000 (2) | 500 |
| 38 | 2.000 (4) | 1.000 (2) | 500 |
| 40 | 2.000 (4) | 1.000 (2) | 500 |
| 45 | 1.200 (6) | 400 (2) | 200 |
| 50 | 1.200 (6) | 400 (2) | 200 |
| 60 | 800 (4) | 400 (2) | 200 |
| 70/60 | 800 (4) | 400 (2) | 200 |
| 80/60 | 800 (4) | 400 (2) | 200 |